minitor-go

A minimal monitoring system

What does it do?

Minitor accepts an HCL configuration file with a set of commands to run and a set of alerts to execute when those commands fail. Minitor has a narow feature set and instead follows a principle to outsource to other command line tools when possible. Thus, it relies on other command line tools to do checks and issue alerts. To make getting started a bit easier, Minitor includes a few scripts to help with common tasks.

But why?

I'm running a few small services and found Sensu, Consul, Nagios, etc. to all be far too complicated for my usecase.

So how do I use it?

Running

Install and execute with:

go install github.com/iamthefij/minitor-go@latest
minitor

If locally developing you can use:

make run

It will read the contents of sample-config.hcl and begin its loop. You could also run it directly and provide a new config file via the -config argument.

Docker

You can pull this repository directly from Docker:

docker pull iamthefij/minitor-go:latest

The Docker image uses a default config.hcl copied from sample-config.hcl. This won't really do anything for you, so when you run the Docker image, you should supply your own config.hcl file:

docker run -v $PWD/sample-config.hcl:/app/config.hcl iamthefij/minitor-go:latest

Images are provided for amd64, arm, and arm64 architechtures.

You can configure the timezone for the container by passing a TZ env variable. Eg. TZ=America/Los_Angeles.

Configuring

In this repo, you can explore the sample-config.hcl file for an example, but the general structure is as follows. It should be noted that environment variable interpolation happens on load of the HCL file.

The global configurations are:

key	value
check_interval	Maximum frequency to run checks for each monitor as duration, eg. 1m2s.
default_alert_after	A default value used as an alert_after value for a monitor if not specified or 0.
default_alert_every	A default value used as an alert_every value for a monitor if not specified.
default_alert_down	Default down alerts to used by a monitor in case none are provided.
default_alert_up	Default up alerts to used by a monitor in case none are provided.
monitor	block listing monitors. Detailed description below
alert	List of all alerts. Detailed description below

Monitors

Represent your monitors as blocks with a label indicating the name of the monitor.

monitor "example" {
  command = ["echo", "Hello, World!"]
  alert_down = ["log"]
  alert_up = ["log"]
  check_interval = "1m"
  alert_after = 1
  alert_every = 0
}

Each monitor allows the following configuration:

key	value
name	Name of the monitor running. This will show up in messages and logs.
command	A list of strings representing a command to be executed. This command's exit value will determine whether the check is successful. This value is mutually exclusive to shell_command
shell_command	A single string that represents a shell command to be executed. This command's exit value will determine whether the check is successful. This value is mutually exclusive to command
alert_down	A list of Alerts to be triggered when the monitor is in a "down" state
alert_up	A list of Alerts to be triggered when the monitor moves to an "up" state
check_interval	The interval at which this monitor should be checked. This must be greater than the global check_interval value
alert_after	Allows specifying the number of failed checks before an alert should be triggered. A value of 1 will start sending alerts after the first failure.
alert_every	Allows specifying how often an alert should be retriggered. There are a few magic numbers here. Defaults to -1 for an exponential backoff. Setting to 0 disables re-alerting. Positive values will allow retriggering after the specified number of checks

Alerts

Represent your alerts as blocks with a lable indicating the name of the alert. The name will be used in your monitor setup in alert_down and alert_up.

monitor "example" {
  command = ["false"]
  alert_down = ["log"]
}

alert "log" {
  shell_command = "echo '{{.MonitorName}} is down!'"
}

Each alert allows the following configuration:

key	value
command	Specifies the command that should be executed in exec form. This is the command that will be run when the alert is executed. This can be templated with environment variables or the variables shown in the table below. This value is mutually exclusive to shell_command
shell_command	Specifies a shell command as a single string. This is the command that will be run when the alert is executed. This can be templated with environment variables or the variables shown in the table below. This value is mutually exclusive to command

Also, when alerts are executed, they will be passed through Go's format function with arguments for some attributes of the Monitor. The following monitor specific variables can be referenced using Go formatting syntax:

token	value
{{.AlertCount}}	Number of times this monitor has alerted
{{.FailureCount}}	The total number of sequential failed checks for this monitor
{{.LastCheckOutput}}	The last returned value from the check command to either stderr or stdout
{{.LastSuccess}}	The datetime of the last successful check as a go Time struct
{{.MonitorName}}	The name of the monitor that failed and triggered the alert
{{.IsUp}}	Indicates if the monitor that is alerting is up or not. Can be used in a conditional message template

To provide flexible formatting, the following non-standard functions are available in templates:

func	description
ANSIC <Time>	Formats provided time in ANSIC format
UnixDate <Time>	Formats provided time in UnixDate format
RubyDate <Time>	Formats provided time in RubyDate format
RFC822Z <Time>	Formats provided time in RFC822Z format
RFC850 <Time>	Formats provided time in RFC850 format
RFC1123 <Time>	Formats provided time in RFC1123 format
RFC1123Z <Time>	Formats provided time in RFC1123Z format
RFC3339 <Time>	Formats provided time in RFC3339 format
RFC3339Nano <Time>	Formats provided time in RFC3339Nano format
FormatTime <Time> <string template>	Formats provided time according to provided template
InTZ <Time> <string timezone name>	Converts provided time to parsed timezone from the provided name

For more information, check out the Go documentation for the time module.

Running alerts on startup

It's not the best feeling to find out your alerts are broken when you're expecting to be alerted about another failure. To avoid this and provide early insight into broken alerts, it is possible to specify a list of alerts to run when Minitor starts up. This can be done using the command line flag -startup-alerts. This flag accepts a comma separated list of strings and will run a test of each of those alerts. Minitor will then respond as it typically does for any failed alert. This can be used to allow you time to correct when initially launching, and to allow schedulers to more easily detect a failed deployment of Minitor.

Eg.

minitor -startup-alerts=log_down,log_up -config ./config.hcl

Metrics

Minitor supports exporting metrics for Prometheus. Prometheus is an open source tool for reading and querying metrics from different sources. Combined with another tool, Grafana, it allows building of charts and dashboards. You could also opt to just use Minitor to log check results, and instead do your alerting with Grafana.

It is also possible to use the metrics endpoint for monitoring Minitor itself! This allows setting up multiple instances of Minitor on different servers and have them monitor each-other so that you can detect a minitor outage.

To run minitor with metrics, use the -metrics flag. The metrics will be served on port 8080 by default, though it can be overriden using -metrics-port. They will be accessible on the path /metrics. Eg. localhost:8080/metrics.

minitor -metrics
# or
minitor -metrics -metrics-port 3000

Contributing

Whether you're looking to submit a patch or tell me I broke something, you can contribute through the Github mirror and I can merge PRs back to the source repository.

Primary Repo: https://git.iamthefij.com/iamthefij/minitor.git

Github Mirror: https://github.com/IamTheFij/minitor.git

Original Minitor

This is a reimplementation of Minitor in Go

Minitor is already a minimal monitoring tool. Python 3 was a quick way to get something live, but Python itself comes with a large footprint. Thus Go feels like a better fit for the project, longer term.

Initial target is meant to be roughly compatible requiring only minor changes to configuration. Future iterations may diverge to take advantage of Go specific features.